Learning how to hit a fairway wood consistently is one of the most satisfying skills you can learn when you play golf.
Many players find it fairly challenging, that is why getting it off by heart wraps golfers with certain bragging rights.
Oftentimes, amateurs attempt to hit their woods as if the goal is to sweep the ball off the ground, or worse, lift it using their clubs.
The styles mentioned above might sound cool for non-players, but it takes an intense golfer to know that those are the two things you should avoid to succeed in hitting a fairway wood.
How to Hit a Fairway Wood
If you want to know the proper way to do it, this article is for you. We will unfold secrets such as how to hit a 5 wood off the fairway or how to hit a fairway wood higher.
But first, what happens when you try to scoop or lift the ball?
It will most likely result in a skulled shot. In simple terms, it means hitting the ball thin. It happens because the leading edge of your iron or wedge is the one in contact with the golf ball as you throw a swing.
Luckily, we provided an elaborate guide on how to avoid these swings. You can play smarter and strike better as long as you acquaint yourself with the proper posture and movement.
How to hit a 5 wood on the fairway
More often than not, amateurs choose a 3 wood to improve the distance of their shot. However, it is more difficult to hit than other woods since it is low-lofted and has a smaller head compared to a driver.
On the other hand, a 5 wood is more manageable because it has 3-4 extra degrees loft. Now the question is, how to hit a 5 wood on the fairway?
Play as if you are using irons
The most crucial point you have to remember to learn how to hit a 5 wood on the fairway is to play it like irons.
In comparison to drivers, irons require a descending blow to hit the ball accurately. That is exactly what a 5 wood needs.
At impact, the swing arc of your fairway wood should reach its lowest point. If you strike it like a driver where it bottoms out prematurely or before impact, the ball would likely be launched upwards.
A downward swing should be taken to bottom out just after the ball, allowing a shallow divot. It is appropriate for 5 wood since it is low-lofted.
Doing otherwise would put you in an unfavored playing position since low-loft clubs do not recover well from deep divots.
Placing the ball in the middle of your stance or a couple of inches inside your left foot is the way to go. It will ensure your wood goes to its lowest point exactly at impact.
Placing your feet shoulder-width apart is the best position when using a 5 wood. Meanwhile, your shoulder should not be parallel to the ground because it would promote ball spin and low launch.
Maintaining balance or 50/50 weight on both of your feet at address is crucial for your swing, so make sure one does not exceed the other.
One of the misconceptions when learning how to hit a 5 wood off the fairway is to swing as hard as you can. The idea might apply to other contexts, but it is not fit with the character of a 5 wood.
The ball might pop upwards if you swing with an excessive force since it has a higher loft than a 3 wood. As long as you follow the steps above, you can master how to hit a 5 wood on the fairway in no time.
How to hit a 3 wood on the fairway
The steps on how to hit a 3 wood on the fairway are relatively different than that of a driver. Sticking to the proper steps would bring you closer to a solid 3 wood hit.
The ball should be kept at a low position. Teeing it high increases its risk of getting scooped up. You would not want to hit it in a way that would allow a very steep trajectory.
Among other things, placing the ball at the front center is the ideal ball position when hitting with a 3 wood.
The placement of the ball is only a part of how to hit a 3 wood on the fairway successfully. Posture is as important, so shoulder setup should not be equal. Your back shoulder should be slightly lowered.
If you want to learn how to hit a 3 wood on the fairway solidly, following the steps we provided is your best bet.
How to hit a 7 wood off the fairway
Hitting a 7 wood is frequently the first choice in tight fairways because of its length and loft balance. How to hit a 7 wood off the fairway consistently relies on the proper position both of the ball and the golfer.
The ball position for 7 wood should be placed in a situation where it is only visible halfway through your clubhead. Teeing higher than supposed to would result in the ball popping upwards.
You would only swing the ball from under. Positioning the ball inside and closer to your lead foot is also recommended to launch the ball higher than usual.
The ball slightly and low swinging is ideal when hitting a 7 wood. It is done to prevent the wood from stepping up the tee since such action would cause several shot hindrances.
When you observe these steps, it is beyond doubt that you will seamlessly learn how to hit a 7 wood off the fairway.
How to hit a fairway wood higher
Whether you are mastering how to hit a 5 wood off the fairway or trying to hitting a 3 or hitting a 7 wood, you have to know how to hit a fairway wood higher for better game performance.
Observing loft at impact, aiming for solid contact, and pouring out your maximum speed are the keys to a high trajectory.
Loft at impact
If your goal is for the ball to travel up to the greens or achieve a long par-5, customizing your club loft might help. Clubhead speed is required to create a launch angle based on the loft you have.
The launch angle and the ball has a direct relationship. The higher is the angle of launch, the higher the ball will go.
Having your woods customized can also help concentrate the effect of gravity, allowing a higher launch.
Allowing contact between the ball and the clubface at exactly a fraction above its middle is ideal if you want to pop your ball higher. A slight forward lean of your club is needed to do so.
Hitting it with the lower part of your clubface will only promote tilt or ball spin since there is a lower loft in that area.
Identifying your dominant physical trait is imperative to generate your desired speed. If you think it is your arms, a long backswing will result in a higher speed.
It is particularly true for Jack Nicklaus, who used his legs to generate momentum.
He employed a lot of movements to play at optimum speed since it is his dominant physical characteristic.
You can get the steps on how to hit a fairway wood off by heart once you satisfy the three definitive steps mentioned.
How to hit fairway woods straight
The proper way on how to hit a fairway wood consistently depends on ball position, posture, and swing movement. As long as you observe these correctly, you can learn the tricky steps on how to hit fairway woods straight shortly.
The ball must be teed low to allow solid contact with your clubface and avoid swinging it up from under.
Area of contact
The center of the clubface or a fraction above it should be in contact with the ball at impact and not the lower part to avoid spin.
Your club should be placed in a lean-forward position to be able to hit the ball accurately. Doing otherwise would only result in a low ball flight.
Assuming you are using a 5 wood or a 3 wood, which are both low-lofted, engaging in a low ball flight would be a nightmare.
Providing yourselves with the information about how to hit fairway woods straight can help you bring your shot to a farther distance more consistently.
Hit a Fairway Wood – All the Secrets are Revealed
The secrets on how to hit a fairway wood correctly lie on how you position your body, the ball, and your golf equipment. Coordination among them can help you improve your game performance.
It might be challenging to set them in sync, but once you do, you would be making records.